User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
33
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
How Do I Configure a Stereo Downmix for My
External Surround Sound?
First, make sure you have set up your external surround sound system.
(See the previous page.) Stereo Downmix is a hot key function, so it
is set up in one of the Hot Key Configuration Menus.
Figure 3–6 Hot Key Configuration Menu
1. Turn the knob associated with the hot key you want the downmix
to be on, so that the long bar (not the control label) is highlighted.
Press the knob until the green Downmix function displays.
2. Turn the knob to either
LtRt or LoRo and press to select the
downmix.
3. Now, on the Main Screen, the system will display a downmix hot
key that you can press to change the external surround sound mix
from 5.1, to stereo, and press again to change to mono.
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys
Hot Key 9 - 16 Configuration Menu
Save / ExitHelp Cancel
Off
1 2 3 4 5 6 7 8
Selectable
Dolby Zoom
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
AES Out (4) Trim
AES Mic Channe...29
Recall Preset
Press for Stat/Meta
Status/Metadata
Off
Dolby
Zoom
Key 7
Trim
Key 1
Rec 1
Key 5
Stat
Mdata
Downmix
Dnmix
Key 8
SDI Feed from Den...24
Status/Metadata/Preset
Data
Pre
Key 2
LtRt LoRo
Auto
Mode
Automation On-Off