User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
32
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
Figure 3–5 Output Configuration Menu
6. Press the
Follow Monitor / Free Mix knob to select Follow
Monitor
, as shown in the figure below.
7. The Select Affect and Main Volume Affect controls should be
set to Yes, so that the channels selected on the Main Screen will
be heard and the volume control will adjust the surround sound.
8. If needed, rotate the Output Trim control to adjust the output of
each channel to match the needs of the external surround sound
system. The Mixer Channel Select control is used in conjunction
with the Output Trim to select the channel to adjust.
9. To turn off the internal speakers so that only the surround
speakers produce audio, use the Speaker Mute control in the
Monitor Mixer Configuration Menu.
Save / ExitHelp Cancel
Mute
With
Phones
Yes
Analog Output Slot 3 Configuration
Menu
Free Mix
Follow
Monitor
Follow
Monitor
+0 +0 +0+0
L. Front R. Front Center LFE
Yes
Yes
Select
Affect
Main
Volume
Affect
Mixer
Channel
Select
Output
Trim
Output 1 Outpput 2 Output 3 Output 4