User guide

821116: AMP2-16V Series User Guide

Chapter 3 The “How Do I...” Chapter

Frequently Asked Questions

3. If you would like to adjust the color-to-color transition points on

the meters, use the Upper Segment and Middle Segment

controls. Pressing each control toggles between setting segment

color and setting transition position.

4. If you selected the

Custom meter scale, the Limits and Lower

Scale

controls become active. Press the Limits control to select

either the upper or lower scale limit and then turn to adjust.

5. If you selected the Custom meter scale, the Lower Scale control

is used to compress the lower part of the meter scale to enhance

detail on the upper part. Press the Lower Scale control to select

Division and then turn to adjust how much of the scale is to be

considered the lower part. The moving arrow indicates this. Select

Size and then turn to adjust the amount of compression of the

lower scale.

How Do I Set Up for External Surround Sound?

If a studio or other monitoring environment contains a surround sound

system, it may be advantageous to connect the monitored sound from

the AMP2-16V Series monitor to this system. Up to four pairs (eight

channels) of AES or analog outputs are available for this use.

Configuration Selection

Main Screen

Audio

Processors

Audio Processor Card Menu

AES Output

Configuration Menu

Analog Output

Configuration Menu

Analog -or- AES

Card Configuration