User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
30
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
3. Turn the Cluster End control so that the blue bracket
encompasses the channel pairs you want in the cluster. Press the
Cluster End control to set the cluster.
4. Press the
Edit Cluster Label control to proceed to a screen that
lets you name the cluster. This name will appear on the main
screens.
How Do I Customize the Meter Scales?
The AMP2-16V contains a number of commonly-used meter scales. It
also provides the ability to define custom scales or custom bar graph
colors.
The meter scale is set in the
Meter Configuration Menu:
Figure 3–4 Meter Configuration Menu
1. Turn the Scale control to select your choice of meter scale.
2. Adjust the Reference and Ballistics controls, if you like.
Meter
Configuration Menu
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Configure
Meters
Meter Configuration Menu
Save / ExitHelp Cancel
AES
IEC1
VU
0 dBr
-72 dBr
12
-30 dBr
15
-20 dBr
0 dBr =
0 dBFS
4
Float
Bar
Top
Bottom
Scale
Bal-
listics
Limits
Reference
Upper
Segments
Middle
Segments
Lower
Segments
0
-60
-50
-40
-30
-10
-20
Lower
Scale
-30 dBr
50% FS
Division
Size