User guide

821116: AMP2-16V Series User Guide

Chapter 2 Installation

Installation Recommendations

Safety Symbols

Installation Recommendations

Mounting

The unit is designed to install into a standard 19" rack mounted at ear

level for best high frequency response and visual observation of the

monitor screen. Please adhere to the following clearances:

Heat Dissipation

The ambient temperature inside the mounting enclosure should not

exceed 40° Celsius (104° Fahrenheit). Adjacent devices can be rack

mounted (or stacked) in proximity to the unit if this temperature is not

exceeded. Otherwise, allow a 1RU (1.75”/44.45mm) space above and

below the unit for air circulation.

WARNING:

The symbol to the left warns of electric shock hazard inside the unit.

Disconnect the power cord before removing access panels when

installing upgrades. Only qualified service personnel are to operate the

equipment with covers removed, and are to exercise caution to avoid

personal injury.

Clearance Surface

24” Front

3” Rear

2” Sides

1.75” Top and Bottom (if either radiates heat)

0” Top and Bottom (if no heat)

Important:

To reduce noise, the monitor does not have any fans. As a result, the

heat generated by the class D power amplifiers, power supplies, and

other components is vented by slots in the side of the unit. Therefore,

as a safety precaution, you must allow proper ventilation on both sides

of the unit.