User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
16
Chapter 1 Quick Start
Getting Support
Figure 1–15 Preset Management Menu
1. From the
Main Screen, press Menu to display the
Configuration Selection Menu.
2. From the Configuration Selection Menu, press the Manage
Presets
knob to display the Preset Management Menu.
3. Rotate the Save Current Config control to the number of the
preset you would like to save the configuration into and then press
the knob.
4. You will be presented with the opportunity to name the preset.
Typically a short name describing the use of the configuration is
appropriate. For example, if the preset will select a number of AES
channels for monitoring, name the preset, AES.
Getting Support
Should you need to contact Wohler’s customer support line (see page ii
for our contact information), you will save time on the phone by
writing down the software and hardware versions installed in your
monitor. Refer to How Do I Find Software Version Information? on
page 57 for instructions.
Preset Management Menu
Save / ExitHelp Cancel
Preset 4:
User Preset 4
Preset 1:
User Preset 1
Preset 1:
User Preset 1
Current Config
Current Settings
Preset 1:
User Preset 1
Preset 4:
User Preset 4
Clear
Preset
Rename
Preset
Save
Current
Config
Copy
From
Copy To
Recall
On
Powerup