User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
15
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
actively refreshed by the software, and will change to reflect
changes in the selected input stream.
12. When you have completed making your selections on the Dolby
Decoder Configuration Menu
, press Save/Exit to return to
the
Metadata Select Menu.
Figure 1–14 Metadata Select Menu
13. Rotate the
Line Select knob to scroll the highlight up or down
among the lines of text to select the line you want to modify.
14. Select the Text Color, Font Size, and the Metadata Select as
you did previously.
15. Repeat Steps 3 through 13 for Pages 2 and 3 as needed.
16. Press the Save/Exit button twice to return to the Configuration
Selection Menu
.
V. Save Your Setup in a Preset
Now that you have a basic configuration for your system, we’ll save it
as a preset so you can reconfigure this way quickly and easily. Note
that if you make any change(s) in the menu settings and return to the
Main Screen without saving them into a preset, a yellow warning flag
will appear on the Main Screen reminding you to do so.
Metadata Select Menu
Help Save / Exit Cancel
Line
Select
Metadata
Page 3
Text
Color
Font
Size
Metadata
Select
SMPTE 2020
Program Description
[Empty]
Dolby Digital Sample Rate
RF Compression Profile
Center/Surround Mix Lev
Stereo Downmix
LtRt Cntr/Srnd Downmix Level
LFE Lowpass Filter
Original Bitstream
Dialogue Level
Press to Configure
Metadata
Source
Note:
Any text line can contain any metadata element.