User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
14
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
Figure 1–13 Dolby Configuration and Metadata
Display Menu
3. Rotate the
Decoder Source knob to select the source for the
Dolby D/E Card. The choices include all available AES input
pairs, all available SDI de-embedded pairs, and Dolby Zoom
Select
.
4. Rotate the Pro-16 Mode Channel knob to select the stream to
decode when two are present in the decoder source pair.
5. Rotate the Dolby E Program knob to select the Dolby E program.
If the selected program is not available, the metadata from
Program 1 will display.
6. Press the CRC Error Reporting knob to toggle Main Screen
CRC error reporting and counting on or off.
7. Rotate the
Decode knob selects the Dolby stream to decode. The
available options include:
All Formats, Dolby D Only, or Dolby
E Only
.
8. Rotate the
Aux Pair knob to select how the Auxiliary Dolby Pair
will be treated. The available options include:
Mute, Mono, LoRo
Downmix
, or LtRt Downmix.
9. Rotate the DRC Mode knob to select the DRC Mode. The available
options are
None, Dialnorm Only, Line Mode, or RF Mode.
10. Repeat Step 8 onward in the previous section.
11. Rotate the Metadata Scroll knob to scroll through the list of
available Dolby metadata items. The metadata items in the list are
Dolby Decoder Configuraton Menu
Save / ExitHelp Cancel
Decoder Source
Pro-16 Mode
Channel
Dolby E
Program
Slot 1 (AES
In) Pair 1
Channel 1
Program 1
Decode
Aux Pair
DRC Mode
All formats
LtRt Downmix
Line Mode
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps
LFE Channel
Disabled
Surround Mode
Not Srnd Encoded
Mdata Scroll
CRC Error
Reporting
On