User guide

821116: AMP2-16V Series User Guide

Chapter 1 Quick Start

Setting Up Your Monitor for the First Time

8. Rotate the Line Select knob to scroll the highlight up or down

among the lines of text to select the one you want to modify.

9. Rotate the Metadata Select knob to select the type of data you

want to display on this line. (If you select [Empty] a blank line

will result on the

Main Screen. This can be used to separate the

data lines so they are easier to read.)

10. Rotate the

Text Color knob to select the text color of your choice.

Use brighter colors for data that is more important to you, or dim

colors for data that is less important.

11. Rotate the Font Size knob to select from a small, medium, or large

font, according to the data line’s importance.

12. Rotate the Status Page knob clockwise to select among the three

available pages.

13. Repeat Steps 2 through 12 for Pages 2 and 3 if needed.

14. Once you have defined all the status data you want to display,

press Save/Exit to return to the Main Screen Configuration

Dolby Metadata

1. On the Metadata Select Menu, rotate the Metadata Source

knob to display

Dolby Decoder, rather than SMPTE 2020.

2. Press the knob when Dolby Decoder displays to display the

Dolby Decoder Configuration Menu.

Note:

Only units equipped with an optional Dolby Cat. 552 card

will show this option.