User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
12
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
Figure 1–11 SMPTE 2020 Configuration Menu
4. Rotate the
SMTPE 2020 Source to select the input card from
which the metadata is to be extracted. The possible choices include
any of the 3G/HD/SD SDI cards.
5. Rotate the SMPTE SDID to select the desired SMPTE SDID. The
data list in the center of the screen indicates whether the chosen
SDID contains metadata. The choices range from 1 through 9.
6. Rotate the Dolby E Program knob to select the desired Dolby E
program.
7. Press Save/Exit to return to the Metadata Select Menu
(Figure 1–12 below).
Figure 1–12 Metadata Select Menu
SMPTE 2020 Configuraton Menu
Save / ExitHelp Cancel
SMPTE 2020
Source
SMPTE SDID
Dolby E
Program
Slot 1 (3G SDI
I/O)
1 (No Assoc.)
Program 1
Mdata Scroll
Program ID
1
Program Description
1spg1---------------------
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps
Note:
Any text line can contain any metadata element.
Metadata Select Menu
Help Save / Exit Cancel
Line
Select
Metadata
Page 3
Text
Color
Font
Size
Metadata
Select
SMPTE 2020
Program Description
[Empty]
Dolby Digital Sample Rate
RF Compression Profile
Center/Surround Mix Lev
Stereo Downmix
LtRt Cntr/Srnd Downmix Level
LFE Lowpass Filter
Original Bitstream
Dialogue Level
Press to Configure
Metadata
Source