User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
11
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
7. Repeat Steps 2 through 6 for Pages 2 and 3 as needed.
8. Once you have defined all the status data you want to display,
press Save/Exit to return to the Main Screen Configuration
Menu
.
SMPTE 2020 Metadata
You can display either SMPTE 2020 or Dolby metadata. If you prefer to
display Dolby metadata, skip to Dolby Metadata on page 13.
1. From the Main Screen Configuration Menu, press the
Metadata Select knob to display the Metadata Select Menu.
Figure 1–10 Metadata Select Menu
2. Rotate the Metadata Source knob to display SMPTE 2020,
rather than
Dolby Decoder.
3. Press the Metadata Source knob to display the SMPTE 2020
Configuration Menu
.
Metadata Select Menu
Help Save / Exit Cancel
Line
Select
Metadata
Page 3
Text
Color
Font
Size
Metadata
Select
SMPTE 2020
Program Description
[Empty]
Dolby Digital Sample Rate
RF Compression Profile
Center/Surround Mix Lev
Stereo Downmix
LtRt Cntr/Srnd Downmix Level
LFE Lowpass Filter
Original Bitstream
Dialogue Level
Press to Configure
Metadata
Source