User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
9
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
III. Arrange the Main Screens
Depending on your needs, the Main Screen provides a number of
arrangements from which you can choose.
1. From the Main Screen, press Menu to display the
Configuration Selection Menu.
2. From the Configuration Selection Menu, press the Config
Main Screen
knob to display the Main Screen Configuration
Menu
. Refer to Main Screen Arrangements on page 67 to see how
the various screen arrangements will appear.
Figure 1–8 Main Screen Configuration Menu
3. When the Main Screen Configuration Menu appears, rotate
the Screen Content knob to select one of the six available
arrangements for the left and right screens (shown in Figure 1–8
above). Rotating the knob moves the highlight box; pressing the
knob makes the selection. (In these cases, the left navigation button
becomes the SWAP button.)
Data refers to metadata, whether from:
• The optional Dolby D/E card,
• The SMPTE 2020 metadata in an SDI stream, or
• The status data in an SDI stream.
If you select a Main Screen arrangement that includes data,
proceed to the following section to specify exactly what data you
want to display.
Main Screen Configuration Menu
Help
Configure
Meters
Configure
Loudness
Screen
Content
Left
Screen
Right
Screen
Left Nav
Button
Video Meters Help
MetersData Help
Video/Mtrs Left SwapData
Video/Data Left SwapMeters
Meters Data Help
Save / Exit Cancel
Metadata
Select
Status
Select
Configure
Hot Keys
1 - 8
Configure
Hot Keys
9 - 16
Configure
Arbitrary
Phase
Video/Mtrs Both SwapMtrs/Data