User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
162
Chapter 8 Troubleshooting
Normal Messages
Normal Messages
Occasionally, if you may make changes to your system, you may
receive an unexpected message the next time you power up the
AMP2-16V Series monitor. Receiving any of the following messages is
part of the normal operation of the unit.
No IP Address
If you are attempting to connect your AMP2-16V Series monitor to your
network and you see this message displayed on the Unit Information
Menu
, refer to Ethernet Setup Screen on page 101 for more
information.
Figure 8–1 Unit Information Menu
Unit Information Menu
Exit
Ethernet Port Configuration
IP Address: 0.0.0.0
MAC Address: 00:03:f4:02:97:55
Serial (RS-232) Port Configuration
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Handshaking: None
Unit S/W
Info.
Ethernet
Serial
Info.
S/W
Update
Network Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0
Unit Name: Edit Studio Mon 3
Ethernet
Setup