User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
6
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
1. To get to the Configure Monitor Mixer Menu, press the Menu
button to enter the
Configuration Selection Menu and then
press the Configure Monitor Mixer knob.
2. Before setting up the monitor mixer, it is wise to plan where you
want each channel you need to monitor to appear on the metering
screen. Table 1–1 may help.
3. To select the inputs that will source each of the displayed and
monitored pairs, rotate the Mixer Channel Select knob to the
channel pair and then use the
Source Pair Select to pick a
channel pair from the available inputs.
4. Then use the Channel Function to assign a function such as Left
Front
, Center, Left Surround, or whatever function you want
this channel to have. This assignment affects how this signal is
treated in other parts of the AMP2-16V, and is essential for correct
monitoring operation, especially in terms of the speaker mix and
the loudness measurement and external surround positioning.
Table 1–1 Channel List
Channel
Number
Cluster Name
(Ex: 5.1
Dolby)
Channel
Source (Ex:
Slot 2: 3G-SDI
In/Pair 4)
Channel Function (Circle One)
1 LF RF C LFE LS RS LRearS RRearS
2 LF RF C LFE LS RS LRearS RRearS
3 LF RF C LFE LS RS LRearS RRearS
4 LF RF C LFE LS RS LRearS RRearS
5 LF RF C LFE LS RS LRearS RRearS
6 LF RF C LFE LS RS LRearS RRearS
7 LF RF C LFE LS RS LRearS RRearS
8 LF RF C LFE LS RS LRearS RRearS
9 LF RF C LFE LS RS LRearS RRearS
10 LF RF C LFE LS RS LRearS RRearS
11 LF RF C LFE LS RS LRearS RRearS
12 LF RF C LFE LS RS LRearS RRearS
13 LF RF C LFE LS RS LRearS RRearS
14 LF RF C LFE LS RS LRearS RRearS
15 LF RF C LFE LS RS LRearS RRearS
16 LF RF C LFE LS RS LRearS RRearS