User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
149
Chapter 6 Input/Output Modules and Options
Adding/Removing Modules
Figure 6–17 Re-Seat System Control Board
14. Firmly press the system control board back into it’s slot so that it is
securely connected as shown in Figure 6–17. Generally, this board
does not snap in.
15. Connect the ribbon cable to the system card.
Figure 6–18 Replace Rear Panel
16. Replace the rear panel as shown in Figure 6–18 above.