User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
146
Chapter 6 Input/Output Modules and Options
Adding/Removing Modules
Figure 6–11 Dolby D/E Option Kit
8. Remove the new Dolby D/E Card from its shipping container
being careful to remain grounded. Figure 6–11 above illustrates
the card and the two standoffs (left) and the four screws (right).
Figure 6–12 Attach First Standoff
9. Attach a standoff to the side of the system control board
containing the Dolby slot, by screwing it in from the other side of
the board as shown in Figure 6–12 above.
Standoff
Screw from the Other Side