User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
145
Chapter 6 Input/Output Modules and Options
Adding/Removing Modules
Figure 6–9 Remove System Control Board's Rear
Panel Adaptor
5. Remove the rear panel adaptor for the system control board as
shown in Figure 6–9 above.
6. Gently remove the ribbon cable from the system board.
Figure 6–10 Remove System Control Board
7. Gently tilt the system board out of its slot and remove it from the
monitor as shown in Figure 6–10 above.