User guide

821116: AMP2-16V Series User Guide

140

Chapter 6 Input/Output Modules and Options

Analog I/O and SPDIF TOSLINK Card

Rear Panel Adaptor

After adding the Analog I/O Card and its corresponding rear panel

adaptor to the AMP2-16V, the rear panel adaptor provides the

connectors shown in Figure 6–4.

Figure 6–6 Analog I/O and SPDIF TOSLINK Rear

Panel Adaptor and Cover Plate

Menu Modifications

You can select the analog input or the Toslink Input from the

Monitor Mixer Configuration Menu and also from the AES and

Analog Output Menus

The Audio Processor Configuration Menu will now display an

Analog I/O knob. Pressing this knob will display the Analog Output

Configuration Menu

from which you can select and configure the

outputs.

Note:

You can modify the analog reference levels in the

Hardware Configuration Menu.