Manualshelf

User guide

ManualsBrandsPROCEED ManualsAmplifierAMP2
11121314151617181920
821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
5
Chapter 1 Quick Start
Setting Up Your Monitor for the First Time
Setting Up Your Monitor for the First
Time
To set up your monitor quickly and efficiently, we recommend that you
set up your initial configuration in the order listed below.
1. Configure the Monitor Mixer: Select the inputs to be monitored.
2. Create channel clusters: Cluster the monitored channel meters to
make them most readable.
3. Arrange the Main Screen: Configure the Main Screen
arrangement.
4. Select the metadata to display on the screen (if you want to display
metadata).
5. Save your setup into a preset.
Press the Menu button on the Main Screen to display the
Configuration Selection Menu.
I. Configure the Monitor Mixer
While the Monitor Mixer Configuration Menu (Figure 1–5)
provides a number of feature adjustments, only a few are needed for
you to get started. (The other feature adjustments are explained later in
this manual in Chapter 5: Menu List on page 75.)
Figure 1–5 Monitor Mixer Configuration Menu