User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
124
Chapter 5 Menu List
SMTPE 2020 Configuration Menu
SMTPE 2020 Configuration Menu
This menu allows you to select the data that you want to appear on
either of the screens depending on how you have arranged the video,
data, and meters to display on the Main Screen. (See IV. Select the
Metadata to Display on the Screen on page 10 for more information.)
Figure 5–31 SMPTE 2020 Configuration Menu
• SMTPE 2020 Source: Rotating this control selects the input source
of the SMPTE 2020 metadata. The possible choices include any of
the 3G/HD/SD SDI cards. Pressing the control has no effect.
• SMPTE SDID: Rotating this control selects the desired SMPTE
SDID. The metadata list to the right of the selection indicates
whether the chosen SDID contains metadata. This control is grayed
out if a SMPTE source is not selected. The nine choices include
Pair 1 through Pair 8 and No Assoc.
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Metadata
Select
Metadata Select Menu
Metadata Source
SMPTE 2020
Configuration Menu
Dolby Decoder
Configuration Menu
or
SMPTE 2020 Configuraton Menu
Save / ExitHelp Cancel
SMPTE 2020
Source
SMPTE SDID
Dolby E
Program
Slot 1 (3G SDI
I/O)
1 (No Assoc.)
Program 1
Mdata Scroll
Program ID
1
Program Description
1spg1---------------------
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps