User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
117
Chapter 5 Menu List
Monitor Mixer Configuration Menu
Figure 5–26 Monitor Mixer Configuration Menu
With the combination of the Volume control, channel clustering, and
speaker setting, you has a very powerful, intuitive tool to arrange the
metering and monitoring options on the
Main Screen so users can tell
at a glance what is happening with the monitored sources.
• Set Cluster: Pressing this knob continues on to the
Cluster
Configuration Screen
, where you can configure and label the
meter clusters, and how they will display on the Main Screen.
• Mixer Channel Select: Rotating this knob moves the red selection
boxes from side to side, selecting the monitor mixer channel and
pair to configure.
• Channel Func: Rotating this knob selects either L Front, RFront,
Center, LFE, R Surr., M Surr., L Rear., L Rear, or R Rear. It is
important to accurately set this for each channel because many
other system functions depend upon it.
• Channel Trim: Rotating this knob changes the gain. This knob has
a range of -60 dB to +12 dB (inclusive) in 1 dB steps. Pressing and
holding this knob for over 1 second returns the setting to 0 dB. You
can mute the channel by turning this knob counterclockwise beyond
-60 dB.
• Audio Delay: Rotating this knob allows you to add an audio delay
of up to 170 ms in 1 ms increments to the speaker audio. As you turn
the knob, the audio delay varies dynamically so that, while
watching the associated video, you can visually and audibly
Monitor Mixer Configuration Menu
Save / ExitHelp Cancel
Chan 1 Chan 2 Chan 3 Chan 4
Slot 2 SDI-3G In
Pair 4
Slot 2 SDI-3G In
Pair 5
+0 +0 +0+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay to Speakers = 170 mS
Audio
Delay
Dolby 5.1
Speaker
Mute:
Off
L Front R Front Center LFE
Channel
Func
Mixer
Channel
Select
Set
Clusters