User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
110
Chapter 5 Menu List
Main Screen
• ITU/EBU: This control selects whether the Main Screen presents
the loudness measurement in
ITU (LKFS) units or EBU (LUFS)
units.
• Default Cluster: The default cluster is the cluster for which
loudness is measured if no other enabled clusters are selected.
Rotating this knob sequences through each of the clusters. Pressing
this knob selects the default cluster. When set to Off, no cluster is
the default. When set to off, no loudness measurement will be
displayed if the selected cluster's measurement is not enabled, or if
no cluster is selected.
Main Screen
In the following screen, the Dolby symbol will appear on the left side of
the meter window if the Dolby D/E card is installed. The loudness
symbol, level, and graph will only appear whenever a meter cluster is
selected, or as otherwise set up in the Loudness Measurement
Menu
. For a description of how to select the arrangement of video,
meters and/or data, refer to III. Arrange the Main Screens on page 9.
Figure 5–22 Main Screen
On the Hot Key Configuration Menu, you can assign the hot keys to
have a variety of functions.
-28 LKFS
SwapVideo/Data
Meta
+0
Dolby
Zoom
Pair 6
Recall
MyMix
Anlg
1
Dolby
5.1
AES 1
Down
Mix
Status
Menu
-60
0
-60
-50
-40
-30
-10
-20
-10
-20
-30
-40
-50
FF
-60
0
D
o
l
b
y
5
.
1
D
o
w
n
M
i
x
A
E
S
1
A
E
S
2
A
n
l
g
1
A
n
l
g
2
Anlg
2