User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
106
Chapter 5 Menu List
Hot Key Configuration Menu 9 Through 16
• Pressing the knob while the highlight is over the knob label displays
the
Label Menu so you can rename the hot key. Refer to the Label
Menu on page 107 for details.
• Pressing the knob while the description (
Select Cluster, Recall
Preset
, Trim, Downmix, Dolby Zoom, Status/Metadata,
Status/Metadata/Preset, or Off) is highlighted steps through
these four options. As each option is displayed, the color scheme
changes as shown in Figure 5–19 on page 107.
• Pressing the knob while a channel or channel pair is highlighted
selects or deselects it from applying to this hot key. Note that in
some cases you can select multiple channels.
• Pressing the knob while a preset is highlighted, selects it and
deselects any other preset that was already selected. If you choose
Selectable, you will be able to rotate the knob to display the
available presets on the Main Screen.
Hot Key Configuration Menu
9 Through 16
This menu allows you to configure hot keys 9 through 16 on the Main
Screen
. The selections on this menu are identical to those on the Hot
Note:
The label may not be changed on the Status/
Metadata
or Off hot keys. The label on the Select
Cluster
can be changed in the Cluster Configuration
Menu
, but not here.
Note:
Multiple trim hot keys cannot adjust the same channels
on the same menu, so channels that are not selectable
are disabled and grayed out.