User guide

821116: AMP2-16V Series User Guide

104

Chapter 5 Menu List

Hardware Configuration Menu

• -22 dBFS = +4 dBu

• -20 dBFS = +4 dBu

• -18 dBFS = +4 dBu

• -16 dBFS = +4 dBu

• -20 dBFS = +8 dBu

• -20 dBFS = 0 dBu

• -18 dBFS = 0 dBu

• -9 dBFS = +6 dBu

• Screen Bright: Press this knob to toggle the screen whose brightness

you want to change. Rotate the knob clockwise to increase the

brightness, or rotate it to counterclockwise to decrease the

brightness. The brightness is measured from

1 to 29.

• Unit Info: Pressing this knob displays the Unit Information

where you can display the version of the various software

components in the system and/or update those software

components. Refer to Unit Information Menu on page 126 for

details.

• Factory Default: Press this knob to clear all of the presets. Use this

function with care because it will undo every setup ever configured,

including factory presets that were installed to tailor system

operation to the option cards purchased. A warning screen will

show when pressed and a second press is required to proceed.

• Balance Control: When rotated or pressed, this control switches the

function of the balance control knob between being a

Balance

control and adjusting the level of the SuperPair into the monitor

mix. When this control is set to adjust the SuperPair trim, the left-

right balance of the monitor mix is automatically centered.

• Menu Lock: Pressing the Menu Lock knob displays the Select

Menu Lock Combination

screen. See Select Menu Lock

Combination on page 122 for details.