User guide

821116: AMP2-16V Series User Guide

102

Chapter 5 Menu List

Hardware Configuration Menu

• Set for DHCP: Pressing this knob resets all the fields (IP Address,

IP Mask, Gateway, and DNS) to all 0s and sets the monitor so it

will accept a DHCP-assigned IP address from your LAN.

• Adjust: Pressing this knob advances the highlight to the octet to the

right. Rotating this knob increases or decreases the octet number

from 0 to 255.

Hardware Configuration Menu

The menu allows you to select a clock source and set reference levels. It

also provides a link to the Unit Information Menu.

Note:

The text area at the bottom of the screen will help you set a

proper IP Address and IP Mask. At this time, the

Gateway and DNS settings are not used.

Also, the center navigation button will change its text from

Cancel to Save/Exit depending on whether the IP

Address and IP Mask settings are usable.

Note:

Except for the Clock Source, these settings are not stored

or recalled as part of a preset. The Clock Source is saved as

part of each preset.

Configuration Selection

Main Screen

Configure

Options

Option

Configuration Menu

Hardware

Configuration Menu

Configure

Hardware