User guide

821116: AMP2-16V Series User Guide

Chapter 5 Menu List

Cluster Configuration Screen

Adding an Auto Mode Hot Key

By setting up an Auto Mode hot key, you can quickly and easily turn

the

Automation Menu on or off. Refer to one of the Hot Key

Configuration Menu

sections of this chapter to do this.

When one of the knobs is assigned as an Auto Mode hot key, the

background color of the knob label will be gold if

Auto Mode is on and

gray if Auto Mode is off. Since it works in parallel with the Auto

Mode

on/off control in the Automation Menu, each one will be

affected by toggling the other one. It determines whether the

Condition/Response settings in the Automation Menu (if any) will be

active or not.

Cluster Configuration Screen

The Cluster Configuration Screen allows you to define and select

clusters for display on the Main Screen.

Note:

This hot key has no settings: simply setting it as an

Automation Menu (on/off) hot key is enough. Moreover,

it is normally not necessary to set up more than one

Automation Menu hot key.

Configuration Selection

Main Screen

Configure

Monitor Mixer

Configuration Menu

Cluster Menu

Set Clusters