Installation Guide

5
PROBRITE.COM
Please call 1-844-507-5651 or email [e-mail] for further assistance.
4
Visit www.probrite.com/install for installation video tutorials and product support
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
AA
BB CC
Part Description Quantity
AA
Wire nut 3
BB
Allen key 1
CC
Junction box gasket 1
PACKAGE CONTENTS
Part Description Quantity
A
Light protection globe 1
B
Cast junction box 1
C
Globe wire guard 1
D
Heat sink 1
Installation
1
For best results
Direct to Surface /
Junction Box
B
A
C
D
2
Shut electric power off
☐ At wall switch verify it is in the o
position (fig 1).
☐ At the main electrical panel turn o
the circuit breaker that supplies power
to the outlet box you are working on
(fig 2).
☐ For screw-in type fuses unscrew the
fuse that supplies power to the outlet
box you are working on (fig 3).
(fig 1).
(fig 2).
(fig 3).
☐ The fixture can be mounted in the
following three ways:
A. Direct Surface / Junction Box
Mount: This fixture includes an
external junction box. Fixture can
also be mounted on top of recessed
junction box (may requiring tapping
hole in fixture base)
B. Pendant Mount: The fixture can also
be mounted as a pendant, via a 1/2"
threaded conduit entry on the top
of the fixture.
C. Surface Conduit Mount: The fixture
can also be mounted directly on the
wall surface using conduit entry.
☐ When installing two fixtures on one
switch, make sure the switch is rated
for at least a 1A inductive load.
☐ Do NOT wire to dimming switch.
Side Conduit Entry
Pendant Mount
Conduit
Pipe
Ceiling
Wall
Conduit
Pipe