Installation Guide

5
PROBRITE.COM
Please call 1-844-507-5651 or email [e-mail] for further assistance.
4
Visit www.probrite.com/install for installation video tutorials and product support
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
AA
BB
CC
Part Description Quantity
AA
#8-32 x 3/4" philips mounting bracket screw 2
BB
Wire nut 3
CC
Allen key 1
PACKAGE CONTENTS
Part Description Quantity
A
Light fixture 1
B
Mounting plate tightening bolt (pre-installed) 1
C
Mounting plate (pre-installed) 1
D
Hanger Wire for hands-free installation (pre-installed) 1
Installation
1
For best results
Wall Mount
Ceiling Mount
1-1/2" 1-1/2"
Round Octagonal
A
B
D
C
NOTE: Mounting plate (D) mounts to
recessed mounted standard junction boxes.
Junction box must be at least 1-1/2 inch in
depth for proper installation for recessed
mount application (fig 1).
(fig 1).
2
Shut electric power off
At wall switch verify it is in the o position
(fig 1).
At the main electrical panel turn o the cir-
cuit breaker that supplies power to the outlet
box you are working on (fig 2).
For screw-in type fuses unscrew the fuse
that supplies power to the outlet box you are
working on (fig 3).
☐
☐
☐
(fig 1).
(fig 2).
(fig 3).
☐ The fixture can be mounted on the wall
as well as on the ceiling.
☐ For wall mount install light 1-12 feet
above the ground.
☐ For ceiling mount install light 8-15 feet
above the ground.
☐ When installing two fixtures on one
switch, make sure the switch is rated for
at least a 1A inductive load.
☐ Do NOT wire to a dimming switch.