Model No. Mfr. SKU NOVA100-PC-4K-BZ NOVA150-PC-4K-BZ 103-05800017-1 103-05900017-1 NOVA COMMERCIAL LED AREA LIGHT INSTALLATION, USAGE, & CARE GUIDE Questions? / Missing Parts? / Need Accessories? Before returning to the store, call or email PROBRITE Customer Service 9am-5pm EST Monday to Friday. 1-844-507-5651 support@PROBRITE.com PROBRITE.
Table of Contents Table of Contents......................... Safety Information....................... Pre-Installation............................. Planning Installation.................... Specifications................................. Tools Required............................... Hardware Included........................ Pre-Installation 2 2 3 3 3 3 4 Package Contents......................... 4 Installation..................................... 5 Installation (Extension Arm)...... 10 Operation ........
Pre-Installation (continued) Installation HARDWARE KIT 1 NOTE: Hardware not shown to actual size.
Installation (continued) Installation (continued) 2 Placing photocell on fixture NOTE: The fixture comes with the twist-lock photocell (E) provided separately in the box. 3A Slipfitter knuckle arm mounting (Applicable for round pipe / tenon mounting only) E B D ☐☐ Photocell (E) must be inserted into the receptacle (B) for fixture to turn ON. NOTE: The fixture comes with the 2-3/8" swivel slip-fitter arm(C) already attached to the fixture(A). ☐☐ Remove the cap from the top of the pole.
Installation (continued) Installation (continued) 4AMaking electrical connections 5A ☐☐ If necessary, strip 3/8" of insulation from junction box or fixture (A) wires (fig 1). ☐☐ Remove the plug from the side of the knuckle arm (C) (Step 1). (fig 3). TIP: Hold stripped ends near each other and align any frayed strands (do not twist wires). Push the wires into wire nut (BB) and use your fingers to twist the wire nut clockwise until tight. Check for tightness by pulling wires.
Installation (continued) Installation (continued) 4B slipfitter knuckle 3B Replacing with extension arm mount Drill mounting holes on the surface (Applicable for wall, square & round pole) ☐☐ Remove the plug from the slipfitter arm (C) of the fixture and loosen the screw to remove the bottom handle. (Fig. 1 & 2) ☐☐ Thread the wires through the extension arm (AA) and align the four holes with the holes on the fixture head. (Fig. 5) ☐☐ Remove the pole's top cover, if applicable.
Installation (continued) Installation (continued) 6B Making electrical connections For Direct to Wall: ☐☐ Align the extension arm (AA) holes with the holes pre-drilled in the wall. ☐☐ If necessary, strip 3/8" of insulation from junction box or fixture (A) wires (fig 1). ☐☐ Use proper bolts or wall anchors, for the type of wall (provided by others), and tighten to sufficient torque setting. ☐☐ Consult with qualified electrician to determine best mounting method and bolts for wall mount.
Operation 1 Care and Cleaning ☐☐ Shut off main power supply before cleaning the product. To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. Selecting Dusk-to-Dawn or Switch-Activated control ☐☐ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty.
5-Year Limited Warranty This is a limited warranty offered by Probrite for a period of five years from the date of purchase to its customers. Probrite warrants to customers that the products will be free from defects in material and workmanship. The obligation of Probrite under this warranty is limited to the provision of replacement of products and is extended to the original purchaser of the product on presenting valid purchase receipt or other proof of date of original purchase acceptable to Probrite.
Questions? / Missing Parts? / Need Accessories? Before returning to the store, call or email PROBRITE Customer Service 9am-5pm EST Monday to Friday. 1-844-507-5651 support@PROBRITE.com PROBRITE.COM RETAIN THIS MANUAL FOR FUTURE USE Para las translaciones en español, visit www.probrite.
