Model No. LED29-PC-GR PROBRITE® LED BULB AREA BARN LIGHT INSTALLATION, USAGE, & CARE GUIDE Questions? / Missing Parts? / Need Accessories? Before returning to the store, call, text, or email PROB RITE Customer Care am-5pm EST Monday to Friday.
TABLE OF CONTENTS Table of Contents. Safety Information, Planning Installation. Specification: Tools Required. Package Hardware Included Troubleshooting. Warranty. PWwWWONN SAFETY INFORMATION IMPORTANT THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
PER-INSTALLATION PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture. SPECIFICATIONS 113 Lumen per watt 4000 Kevin (Bright White} Non-Dimming {Do not wire to dimming switch) Dusk-to-Dawn: Automatically mute light fixture ON during night and OFF during day.
PER-INSTALLATION (CONTINUED) PACKAGE CONTENTS Light fixtures Photocell lens ‘Wire cover plats Fixture arm Reflector LED light {YMT T100 29W 1340-40) HARDWARE KIT NOTE Hardware of shown to acu Canaanite aviary | AA | #8-32x34" Philips head screw 3 BB | Wire nut 3 €C | Rubber grommet 1 DD | Flat washer 3 a Visit for Inst nation video tutor lats and product support
INSTALLATION 1 FOR BEST RESULTS Review this Information to ensure a successful Installation: O Install the light 12-30 ft above the ground. tg 1. O When mounting the fixture, ensure the photocell is in an area that receives daylight and is not too Wall Mount close to reflective surfaces in order to ensure successful Dusk-to-Dawn operation. O When Installing two fixtures on one switch, make sure the switch Is rated for at least a 1A Inductive load. fig 2). O Do NOT wire to a dimming switch.
INSTALLATION (CONTINUED) PREPARING FOR MOUNTING THE FIXTURE Wall Mount NOTE: Tha listen comes wile the whe guard protection [IBA 1 swirly rats 0 th Tic urn mn (3) 0 Remove the wire guard protection plate (C) from the arm (D) of the fixture by loosening the screws. 0 Mark and per-drlll the three holes on the desired location of the mounting surface. Extension Arm Mount O Remove the wire guard protection plate (C) from the arm (D) of the fixture by loosening the screws. (fig 7).
INSTALLATION (CONTINUED) MAKE THE ELECTRICAL CONNECTIONS 0 Place rubber grommet (CC) Ito the hols of the wire cover plate before threading wires F through. O Thread the wires through the hole In the wire cover plate (C) before making wiring connections. or Wall and Extension Arm Mount Electrical Wiring DO If necessary, strip 3/8 in. of insulation from the junction box of fixture (A) wires.
INSTALLATION (CONTINUED) SECURING THE FIXTURE AND WIRING 0O Once the fixture Is wired, place the wire cover plate {C} on the arm (D) by tightening the two screws removed earlier. {fig 12) Wall Mount {igloo) Extension Arm Mount O After wiring ls composts, secures the fixture on the extension arm by tightening the screws removed sampler. (fig Extension Arm Mount {fig 13) ® MICROMETEORITE Please call 1-844-507-5651 or mall com for further assistance.
INSTALLATION (CONTINUED) f INSTALLING THE REFLECTOR Preparing the reflector for Installation O Place the hooks from the bottom part of the lens reflector (E} Into the holes provided In the upper part of the reflector’ & (B} rim and twist the bottom lens to fit. a Close the hooks by pressing them down to lock. Attaching the reflector to the fixture O Install two small screws Included with the reflector (E) leaving about 1/4 In. of space under the fixture head (A).
OPERATION 1 SELECT DUSK-TO-DAWN AUTOMATIC NIGHTTIME ON wh OPTION 1: DUSK-TO-DAWN OPERATION W » Dusk-to-dawn operation enables the light fixture to automatically turn DAYTIME OFF ON when dark outside and turn OFF when the sun rises, thus saving you energy. 0 Toe enable dusk-to-dawn operation, make sure the photocell (B} Is exposed to light and Is unobstructed. 0 Ensure the switch powering the light fixture Is muted to the ON position and leave It ON at all times to enable automatic dusk-to-dawn operation.
CARE AND CLEANING O Shut off main power supply before cleaning the product. To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. O Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may cold the warranty. O Dona spray the light fixture with a hose or power washer.
S-YEAR LIMITED WARRANTY This is a limited warranty offered by Prostitute for a period of five years from the date of purchase to its customers. Prob rite warrants to customers that the products will be free from defects in material and workmanship.
