Owner`s manual

13
Section 6: Maintenance
m 4. Carefully pull the ferrule away from
the stuffing tube. You will need to pull at
an angle to clear the aluminum strut.
m 5. Liberally lubricate the entire length of the
flex shaft with silicone cable grease as shown.
m 6. Carefully re-install the flex shaft and nylon
bushing, making certain that you correctly
tighten the collet nut. Next, re-install the drive
shaft and propeller and tighten the setscrew
on the flat of the drive shaft. Use screw
locking compound to secure the setscrew.
Stuffing Tube
Ferrule