User guide

2 | Setting Up the Instrument with Image Lab Software
48 | ChemiDoc MP Imaging System with Image Lab Software
 Select the Use local groups for establishing user security levels checkbox.
3. To set preferences so that only local users can run Image Lab:
 In the Domain used in authentication field, enter your local computer name.
See To find the name of your local domain on page 229 for instructions on
how to determine this name.
Note: The default domain name that will appear in this field is the
domain on which the curr
ent user is logged in.
 The Use local groups for establishing user security levels checkbox is
grayed out (not accessible).