User's Manual

3
 Then aach Middle Base Plate with Ronin
Plate (Not Included). Insert the bolts and
ghten them with help of allen key.
 Now aach this Middle Base Plate with
Isolator Plate and ghten the bolts
accurately with allen key, as shown in image.
 Finally, you can mount Base Plate with
L-plate of your Isolator Arm (Not Included)
and mount your Gimbal.
 Loosen the bolts from top and boom of
Vibraon Isolator.
 Then remove bolts and one wire set from
Vibraon Isolator plate.
Single Spring Set Setup
NOTE: Vibraon Isolator can also be customized with Single Spring conguraon for using with
lightweight setups from 15-30kg / 33-66lb.