User's Manual

2
 Aach Mitchell Vibraon Isolator with plate
of your setup and ghten to secure it
properly.
 Then loosen the bolts of Mitchell plate and
insert Castle Ring into it. Connect any Gimbal
Mount with Castle Ring as shown in the
image.
Mitchell Isolator Setup
Isolator Base Plate Setup
NOTE: The isolator plate can be xed both Over
Slung and Under Slung, as per your
requirement.
 Loosen bolts on Mitchell Plate with help of
allen key and remove the plate. Your
equipment will look as shown in image.
 Turn Isolator upside-down & loosen the bolts
to remove Isolator with Base Plate.
 Now loosen 4 corner bolts of Middle Base
Plate and remove Rods as shown in image.
NOTE: You can also aach only Vibraon Isolator Plate by removing the Mitchell Plate.