User's Manual

ManualsBrandsProaim ManualsGimbal Mounting ComponentsVibration Isolator with Mitchell Mount for Camera Gimbals

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Mitchell Vibraon Isolator for Gimbals (VB-MTCL-00)

Ass e mb l y M a n u a l

Mitchell Plate

Middle Base Plate

Rods

Vibraon

Isolator

Base Plate

Allen Key

Summary of content (4 pages)

PAGE 1
Mitchell Vibration Isolator for Gimbals (VB-MTCL-00) Assembly Manual What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Mitchell Plate Rods Middle Base Plate Vibration Isolator Allen Key Base Plate All rights reserved.
PAGE 2
Mitchell Isolator Setup  Attach Mitchell Vibration Isolator with plate of your setup and tighten to secure it properly. NOTE: The isolator plate can be fixed both Over Slung and Under Slung, as per your requirement.  Then loosen the bolts of Mitchell plate and insert Castle Ring into it. Connect any Gimbal Mount with Castle Ring as shown in the image. Isolator Base Plate Setup NOTE: You can also attach only Vibration Isolator Plate by removing the Mitchell Plate.
PAGE 3
 Then attach Middle Base Plate with Ronin Plate (Not Included). Insert the bolts and tighten them with help of allen key.  Now attach this Middle Base Plate with Isolator Plate and tighten the bolts accurately with allen key, as shown in image.  Finally, you can mount Base Plate with L-plate of your Isolator Arm (Not Included) and mount your Gimbal.
PAGE 4
 Now adjust other wire set in center of the Vibration Isolator and tighten all allen bolts to secure spring set appropriately YOUR PROAIM MITCHELL VIBRATION ISOLATOR FOR GIMBALS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.