User Guide

Proaim Sr. Pan-Tilt Head with 12V Joysck Control 3

1. Gear for Tilng Movement

2. Gear for Panning Movement

3. 12v motor for Panning Movement

4. 12v motor for Tilng Movement

5. Adjustable Camera Plaorm

6. Base Plaorm for Tripod/ Jib Mounng

7. Joysck for pan/lt movement

8. On/O Switch

9. Dead Spot Knob

10. Speed Knob

 Aach the PROAIM™ Sr. PAN-TILT HEAD base

plaorm to the tripod or jib arm using the four

standard ¼”screws and ghten to secure it

properly.

Please use the following sequence of pictures and text in the order they appear to set up your new

Sr. Pan and Tilt Head. Technical assistance is available by contacng your sales representave.

PARTS OF PAN-TILT HEAD

11. 12/24 V DC Input – 4 Pin XLR

12. Fuse Holder

13. 4- Pin power out to Head

14. AC Adapter

15. 15 meter long cable

16. Pan Direcon Switch

17. Damping Knob

18. Joysck Cap

19. Tilt Direcon Switch

WARNING: NEVER MOVE ANY PART OF THE HEAD BY HAND! THE REDUCTION DRIVES IN THE

MOTORS HOLD EACH AXIS IN PLACE. TO MOVE BY HAND MAY PERMANENTLY DAMAGE THE MOTOR

GEARBOX.

PROVIDE SLACK IN THE CABLE LENGTH GOING TO THE PROAIM PAN TILT HEAD FROM THE CONTROL

BOX TO AVOID TENSION ON THE CABLE AND CONNECTORS. TENSION WILL DAMAGE THE CABLE

WHEN THE CRANE IS BOOMED UP OR DOWN.