User's Manual

2
Aaching Rail Secon

The End Spacers have 1/4” and 3/8”
mounng threads. Mount the 2 Stand
adapters at the boom of the End spacers.
Then mount it on the stand and secure it by
ghtening the knob.
 Press in the Track into the end caps unl you
hear a click.
Proaim Overhead Rig Setup
 The Accessory Spacers also include 1/4” and
3/8” threads for mounng accessories. Place
the Accessory Spacers at the desired locaon
along the Track. The Spacer’s end caps must
be facing down. Make sure the Accessory
Spacer clicks on the track rails.
3x Accessory Spacers
 Aach track secons as shown and secure
them using the provided bolts. The Track
comes in a pair of 3 x 4 secons, so the
maximum length for the Track is 12.
The Track includes two types of Spacers:
2x End Spacers