Orion Geared Head (P-OGR-H ) Instruction Manual
At Proaim, our goal is to ensure 100% Customer Satisfaction in all that we do. We back our sales with a 1 year warranty from the date of purchase and work hard to resolve any problems in the unlikely event one should arise. With our commitment to continuous improvement and your Feedback, building on our reputation of providing affordable, quality products is PRIORITY #1.
Welcome To Proaim! Dear Client, On behalf of all the people that work so hard to provide you with the most up-to-date, flexible and cost-efficient production gear, we would like to welcome you into the Proaim family. By purchasing your Proaim Orion geared head, you have just joined a host of designers, engineers, machinists, assembly, customer service and office staff that take great pride in all that they do.
Introduction Orion Geared head precisely controls your camera's orientation while offering immensely stable, smooth and balanced shots. This CNC constructed gear head is perceptively designed for independent and professional filmmakers & is perfect for numerous professional cameras. It can be installed on existing tripod with provided 100mm Bowl and Mitchell Base. It includes a locking mechanism that allows to use panning & tilting function together or separately as per your requirement.
Safety Hints ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE GEAR! BE HIGHLY VIGILANT WHILE PLACING Gear Head must be carefully locked while setting-up on any equipment. DO NOT FORGET TO SECURE THE CAMERA While mounting camera on Gear Head, lock Tilt Axis and keep Pan Axis on neutral position. NEVER LEAVE THE KNOBS LOOSE Always tighten the locking knobs properly for giving security to camera setup.
Now insert both Panning & Tilting Cranks on Orion Geared Head and tighten the knobs to secure them appropriately. Panning Crank Tilting Crank In order to use both Panning & Tilting Axis simultaneously, loosen both Panning & Tilting locking knobs. NOTE: To use only one function, lock the other direction knob. Panning knob Tilting Knob Panning Speed Control Mechanism NOTE: Adjust the speed of Cranks by controlling Speed Mode through Levers.
To control speed of Tilt Direction, adjust the Tilting Knob. Finally, mount your camera setup and tighten the knob. To Use With Mitchell Base Loosen the bolts and remove 100mm Bowl base by provided allen key. Then, mount Orion Geared Head on Mitchell Tripod stand and lock it accurately with Tightening Knob.
YOUR PROAIM ORION GEARED HEAD ALL DRESSED UP AND READY TO GO! WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us.
