User Manual

Included:
(12) 1/4-20 x 5/8" button head screws—12pcs
(6) 1/4-20 x 3/8" button head screws--6pcs
(2) 1/4-20 x 2" button head screws —2pcs
(1) M2.5 x 4mm black socket cap screw --2pcs
(for Odyssey 7Q location pin)
(1) 4mm allen Key—1pcs
INSTALLATION
1. Select the two MAIN BRACKETS and locate the
correct
1/4-20 HOLES
2. Select the four SIDE BRACKETS, align to 1/4-20
HOLES as shown below, select 1/4-20 x 5/8”
SCREWS, tigthen to MAIN BRACKET with allen
wrench
3. Select the two HANDLES, locate and
align the 1/4-20 HOLES to SIDE
BRACKETS as shown below, select and
tighten 1/4-20 x 5/8” SCREWS with allen
wrench
4. Select the two OFFSET BRACKETS and locate
the correct 1/4-20 HOLES on the MAIN
BRACKETS
5. Locate and align SCREW CHANNELS on
OFFESET BRACKET to 1/4-20 HOLES, select
and tighten
1/4-20x1/2” SCREWS with allen wrench
6. Select BATTERY PLATE, the two POSTS, and
1/4-20x2” SCREWS
7. Locate and align the POSTS to the correct 1/4-
20 HOLES on MAIN BRACKET as shown
below
8. Align SCREW CHANNELS of BATTERY PLATE over
POSTS, insert and tighten 1/4-20x2” SCREWS to
MAIN BRACKET with allen wrench