Installation manual Owner's manual

12
PROGRAMMING THE THERMOSTAT
Set Time
Follow the steps below to set the day of the week and current time:
Press MENU
Press TIME
Day of the week will be flashing. Use the or key to select the current
day of the week.
Press NEXT
The current hour is flashing. Use the or key to select the current hour.
When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.
Press NEXT
Minutes are now flashing. Use the or key to select current minutes.
Press DONE when completed
1.
2.
3.
4.
5.
6.
7.
8.
two