Manual

ManualsBrandsPro1 ManualsEquipmentT721 Operation manual

Thismanualcoversthefollowingmodels:

• T721

OPERATING MANUAL

Caution:

Equipment damage hazard

Donotoperatethecooling

systemiftheoutdoor

temperatureisbelow50˚ F

(10˚ C) to preventpossible

compressordamage.

ThermostatQuickReference

ThermostatOperation

SetTime

MoreInformation

Congratulations on purchasing a

new thermostat.Thisthermostatwas

designedtothehighestreliabilityand

easeofusestandards.Thankyoufor

choosingPro1.

® U.S. RegisteredTrademark.Patentspending.

Rev.0850

Table of Contents Page

Need Help?

For assistance with this product please visit

http://www.pro1iaq.com or call Pro1

Customer Care toll-free at 888-Pro1iaq

(776-1427) during normal business hours

(Mon-Fri 9 AM - 6 PM Eastern)

Una versión española de este

manualpuedeserdescargada

enwww.pro1iaq.com

Summary of content (6 pages)

PAGE 1
OPERATING MANUAL This manual covers the following models: • T721 Congratulations on purchasing a new thermostat. This thermostat was designed to the highest reliability and ease of use standards. Thank you for choosing Pro1.
PAGE 2
THERMOSTAT QUICK REFERENCE Getting to know your thermostat 1 2 1 Displays the user selectable setpoint temperature. LCD System operation indicators: The COOL, HEAT or FAN icon will display when the COOL, HEAT or FAN is on. NOTE: The compressor delay feature is active if these icons are flashing. The compressor will not turn on until the 5 minute delay has elapsed. Days of the week and time 6 Button options 7 3 4 5 Low Battery Indicator: Replace batteries when indicator is shown.
PAGE 3
THERMOSTAT OPERATION Easy to use controls 2 Caution: 1 When the battery icon appears replace your AA batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable. 5 6 3 4 1 LCD Display: See page 2 for details about this display read out. 2 Glow in the Dark Light Button: The glow in the dark light button will self illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed.
PAGE 4
SET TIME Set Time Follow the steps below to set the current time: 1. Press MENU 2. Press SET TIME 3. Day of the week will be flashing. Use the or key to select the current day of the week. 4. Press NEXT STEP 5. The current hour is flashing. Use the or key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected. Important: You will see a TECH SET option after the MENU key is pressed.
PAGE 5
MORE INFORMATION Filter Change Reminder If your installing contractor has configured the thermostat to remind you when the air filter needs changed, you will see FILT in the display when your air filter needs changed. FILT will be shown in the display after your system has run long enough to require an air filter change.
PAGE 6
CONTACT US AND WARRANTY INFORMATION Contact Us Information Pro1 IAQ Inc. 1111 S. Glenstone Suite 2-100 Springfield, MO 65804 Toll-free: 1-888-Pro1iaq (776-1427) Toll Number (Outside the USA): 330-821-3600 Web: http://www.pro1iaq.com Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern Warranty Registration: Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways. 1 2 Go to www.pro1iaq.