Pro1 Installation Manual

ProgrammingProgramming
Tech Settings Programming
This feature will start heating or
cooling early to bring the building
temperature to its programmed
setpoint by the begining of the
WAKE or RETURN time period.
Pro
Recovery
ON
You can congure this thermostat
to have 7 Day, 5+1+1 program-
ming or non programmable.
Program
Options
5d
Use the and key to se-
lect 7d for 7 Day, 5d for 5+1+1,
or 0d for non programmable.
Next Step
Prev Step
Next Step
Prev Step
Use the and key to turn
ON or OFF.
Tech Settings
Adjustment Options Default
LCD Will Show
Select GAS for systems that control
the fan during a call for heat. Select
ELEC to have the thermostat control
the fan during a call for heat.
Fan
Operation
GAS
GAS - GS
or
ELEC - EL
Next Step
Prev Step
Set Time
1. With system switch set to OFF, press the MENU button
2. Press SET TIME
3. Day of the week will be ashing. Use the or key
to select the current day of the week.
4. Press NEXT STEP
5. The current hour is ashing. Use the or key to
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6. Press NEXT STEP
7. Minutes are now ashing. Use the or key to
select current minutes.
8. Press DONE when completed.
(If using programming)
Programming
All of our programmable thermostats are shipped with an
energy saving pre-program. You can customize this default
program by following the steps on page 15.
Your thermostat can be programmed to have all the weekdays
the same, a seperate program for Saturday, and a seperate
program for Sunday or 7 days individually. There are four time
periods for each program (WAKE, LEAVE, RETURN, SLEEP).
Set Program Schedule 5+1+1 or 7 Day (Continue.. )
You can also use these time saving functions. You must be in Set
Sched Programming Mode (Press Menu >> Press Set Sched)
for the following functions to work:
If using 7-Day Programming use previous steps for
every individual day.
1) To copy ALL time periods and temperatures of current system and
day to ALL days, Press and Hold 2nd button down on left until the
Days and Time ash.
2) To copy ALL time periods (only times) for ALL days to the opposite
system (Heat to Cool / Cool to Heat), Press and hold the Glow in the
Dark Light button down until Set Time and Time ash.
Set Program Schedule 5+1+1 or 7 Day
1. Select HEAT or COOL with the system switch. Note: You
have to program heat and cool each seperately.
2. Press the MENU button (If menu does not appear rst press RUN SCHED)
3. Press SET SCHED. Note: Monday-Friday or (Monday if in 7
Day) is displayed and the WAKE icon is shown. You are now
programming the wake time period for that day.
4. Time is ashing. Use the or key to make your time
selection for that day’s WAKE time period.
5. Press NEXT STEP
6. The setpoint temperature is ashing. Use the or
key to make your setpoint selection for that day’s WAKE
time period.
7. Press NEXT STEP
8. Repeat steps 4 thru 7 for that day’s LEAVE time period,
RETURN time period, and SLEEP time period.
To customize your program schedule, follow these steps:
Repeat steps 4 through 7 for the Saturday WAKE time period, LEAVE time
period, RETURN time period, and for the Saturday SLEEP time period.
Saturday:
Repeat steps 4 through 7 for the Sunday WAKE time period, LEAVE time
period, RETURN time period, and for the Sunday SLEEP time period.
Sunday: