Install Instructions

9
TECHNICIAN SETUP MENU
If ON is selected the
beep will sound. If
OFF is selected, there
is no sound.
OFF configures
display light to come
on only with the light
key, which will save
battery power.
ON configures the
display light to come
on when any key is
pressed.
ON OFF ON
Heat - Off - Cool
Adjustment Options
Factory Default Settings
The display light can
be configured to
come on when any
key is pressed or
only when the light
key is pressed.
When any key is
pressed an audible
beep will sound.
There is an ON
or an OFF.
You can configure the
system switch for the
particular application:
Heat - Off - Cool,
Heat - Off,
Cool - Off,
Heat - Off - Cool - Auto
Allows you to put
your phone number
in the display.
You can choose
ON or OFF
Tech Setup Steps (Continued from the previous page)
Contractor
Call Number
Beep System
Switch
Display
Light
LCD Will Show
Use the or
key until the desired
application is
flashing.
Use the or
key to select the
desired number and
the FAN or SYSTEM
key to move from
one character to
another. See note
below on operation.
If selected on, you
will see the input
screen after pressing
next step.
Note: If Contractor Call Number is selected ON, your phone number
will show in the display if there has been a continuous call for heating
or cooling for 24 hours or if the light button is held down for 3 seconds.
To remove the phone number from the display, hold the light button
down for 3 seconds.