Specifications

CD-312
PRO WELD
1 1.4 TEMPLATE ADAPTER (see Figure 7)
The template adapter is used when precise
location or positioning of the CD stud is requir ed.
It is used with the round faceplate and does not r e-
quire a footpiece or legs. The adapter is fastened to
the faceplate and provides a fixed distance b e-
tween the collet and work. The plunge is set by u s-
ing the correct stop in the collet. A template can
then be fabricated to enable very precise locating
of a particular stud.
Th e template adapter is available in two
sizes, (1” and 1 - 1/4” diameter).
1 1.5 COLLET PROTECTOR/BLUNT LEG
(see Figure 8)
The round faceplate, with blunt legs, can alte r-
nately be used with the collet protector as shown in
Figure 8.
Figure 8 Template Adapter gun setup
Figure 9 Collet Protector/Blunt Leg Setup
PAGE 11