Specifications

CD-312

PRO WELD

9.0 WELDING SYSTEM HOOK

9.1

Straight Polarity (Standard Set

Up) (see Figure 2)

A. Connect ground cable connector (1A) into c

amlok (1). The camlok should be connected into the

receptacle marked GROUND. Twist until it locks. Attach “C” clamp (2) to the w

orkpiece (5)

(CLEANED AREA).

B. Connect the gun control cable (3A) into the female receptacle (3).

C. Connect the gun weld cab

le (4A) into the receptacle marked GUN (4). Twist clockwise until it

locks.

D. Connect AC power cable to AC outlet.

NOTE:

The

gun welding and control cables must be laid out in a straight line. Poor weld quality may result if

welding cables are coiled.

Figure 2 Straight Polarity Hook

PAGE 4