Specifications

PRO WELD

CD-212 GAP

Adjustment of stud welding gun

Adjustment of stud collet

For different stud diameters, different collets are required.

Adjust collet as follows:

* Loosen counternut (3)

Insert stud (1) into collet.

The top edge of the stud flange must project for about .06 (1.5 mm) from the

front edge of the co

llet.

* Adjust stop screw (4) in the collet by turning it until the distance from

the top edge of the stud flange to th

e front edge of the collet equals

.06 inches (1.5 mm).

* Lock stop screw (4) by means of counternut (3).

* The following ta

ble indicates which tripod leg length is required.

Stud Length

Leg Length

Part #

–

1 3/8

2”(standard)

F01358

1/2

–

1 7

2 1/2”

F01359

–

2 3/8

3”

F01360

–

3 3/8

4”

F01361

1. Stud

3. Counternut

2. Collet

4. Stop Screw

NOTE:

The stud must make contact with the stop screw(4).

Page