Operation Manual

30
The bike carrier is already assembled in part. Remove all parts from packaging
and arrange them in a well-organized way. The instructions will clearly describe
and show the parts that you need for each step and how to assemble the bike
carrier.
Step 1
Parts:
Assembly:
Place the aluminium mainframe on top of the
sliding frame and make sure that the four bolt-
holes match with each other. Put the handle on the
“front” holes and screw everything together with
four carriage bolts (M6x75), washers (M6) and nuts
(M6).
Attention: The base frame is a hollow aluminium
pipe. Tighten the nuts until you feel a certain
resistance, otherwise the pipe might warp!
End result: