Product Brochure

10
PROFESSIONAL-GRADE CONSTRUCTION FASTENERS
DRYWALL & LIGHT-GAUGE STEEL SCREWS
Wood Trim
Gypsum Board
Steel Stud
TRIM HEAD, SHARP POINT,
SQUARE DRIVE
For attaching wood trim and base - over
gypsum board to light-gauge steel studs, or
wood substrate. #1 or #2 Square Recess drive.
Black Phosphate.
Contractor Tip:
When hanging drywall, space screws a maximum of 12” apart on ceilings and 16” apart on walls. Allow at least 3/8” from
the ends and edges of panels. Sink screws to just below the panel surface, leaving the paper intact. Always check your local
building codes to make sure you’re in compliance.
Light-Gauge Steel Stud
Light-Gauge Steel Track to Light-Gauge Steel Studs _
PAN FRAMER, SHARP POINT
For attaching 25-20 gauge steel track to 25-20
gauge studs. With serrations to reduce spin out.
For use in non-load bearing applications only.
#2 Reduced Phillips Recess. Black Phosphate.
Light-Gauge Steel Track
Metal Lath in Stucco to Wood or Light-Gauge
Steel Studs _________________________________
MODIFIED TRUSS,
SHARP POINT
For attaching metal lath to wood or
25- to 20-gauge studs in stucco and other
applications Phillips Recess. Zinc Plated
and Black Phosphate.
Steel Stud
Metal Lath in Stucco
SIZE BULK PCS/ 5 LB 1 LB APPROX
CT QTY/LB
6 x 1-5/8“ TH158 5M NTH1585 NTH1581 266
6 x 2-1/4” TH214 3M NTH2145 NTH2141 194
8 x 3“ TH3 2M NTH35 NTH31 99
Wood Trim and Base - Over Gypsum Board to
Light-Gauge Steel Studs ______________________
SIZE BULK PCS/ 5 LB 1 LB APPROX
CT QTY/LB
7 x 7/16” PF716 10M NPF7165 NPF7161 378
7 x 7/16” PF71615M 15M - - 378
SIZE BULK PCS/ 5 LB 1 LB APPROX
CT QTY/LB
ZINC PLATED
8 x 1/2“ MT812 10M NMT8125 NMT8121 282
8 x 3/4” MT834 8M NMT8345 NMT8341 206
8 x 1” MT100 5M NMT1005 NMT1001 181
8 x 1-1/4” MT114 5M NMT1145 NMT1141 156
8 x 1-5/8” MT158 5M NMT1585 NMT1581 132
8 x 1-7/8” MT178 4M NMT1785 - 113
8 x 2” MT200 2.5M NMT2005 NMT2001 107
8 x 2-1/2” MT212 2M NMT2125 NMT2121 91
8 x 3” MT300 1.5M NMT3005 NMT3001 74
10 x 3-1/2” MT10312 1M - - 54
10 x 4” MT10400 1M - - 47
BLACK PHOSPHATE
8 x 1/2“ MT812BP 10M - - 282
Gypsum Board to Gypsum Board ________________
DRYWALL LAMINATOR,
SHARP POINT
For attaching gypsum board to gypsum board.
#2 Reduced Phillips Recess. Black Phosphate.
SIZE BULK PCS/ 5 LB 1 LB APPROX
CT QTY/LB
10 x 1-1/2” LS10112 5M NLS101125 NLS101121 137