MODEL 3 BEAD ROLLER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA 33637-6715 813-986-9000 PHONE 813-985-6588 FAX www.pro-tools.
HANDLE INSTALLATION TOP HANDLE APPLY LOC-TITE BUTTON ADJUSTMENT BLOCK TO ASSEMBLY THE TENSION HANDLE YOU WILL NEED TO THREAD TOP PART OF HANDLE INTO MACHINE. THEN SLIDE BUTTON INTO ADJUSTMENT BLOCK. PLACE A LIBERAL AMOUNT OF RED LOC-TITE ON LOWER THREADS AND SCREW INTO BUTTON. LET LOC-TITE CURE AND LUBRICATE OUTSIDE OF BUTTON SO IT WILL ROTATE EASILY.
OPERATING INSTRUCTIONS FOR MODELS STEP 1: TURN TOP HANDLE COUNTERCLOCKWISE TO RAISE TOP ROLLER TO ALLOW FOR MATERIAL TO ENTER IN. STEP 2: PLACE MATERIAL AT JUST PAST EDGE OF ROLLERS AND TURN TOP HANDLE CLOCKWISE TO SECURE MATERIAL.
OPERATING INSTRUCTIONS FOR MODELS STEP 3: SWITCH TOGGLE SWITCH IN UP POSTION FOR A STRAIGHT FEED. STEP 4: DEPRESS FOOT PEDAL TO START ROLLING YOUR BEAD.
OPERATING INSTRUCTIONS FOR MODELS STEP 5: FEED THE MATERIAL ALL THE WAY THRU THE BEAD ROLLER. STEP 5: AFTER FIRST PASS PLACE SWITCH IN DOWN POSITION (REVERSE). NOW YOUR READY FOR THE SECOND PASS OF THE MATERIAL.
OPERATING INSTRUCTIONS FOR MODELS STEP 7: FEED THE MATERIAL BACK THROUGH BEAD ROLLER. THIS IS THE REVERSE OF STEP4. STEP 8: TURN ADJUSTMENT HANDLE COUNTERCLOCKWISE TO RELEASE MATERIAL. YOUR BEAD IS DONE.
WARRANTY POLICY ALL PRODUCTS THT PRO-TOOLS MANUFACTURES CARRY A ONE YEAR GUARANTEE AGAINST DEFECTS IN MATERIAL OR WORKMANSHIP. (PRODUCTS THAT WE SELL BUT DO NOT MAKE ARE COVERED UNDER THAT MANUFACTURING WARRANTY PLAN). ANY TOOLS OR PARTS THAT FAIL ARE 100% COVERED UNDER THE WARRANTY AND WILL BE REPAIRED FREE OF CHARGE (EXCLUDING FRIEGHT CHARGES). MISUSE OR ABUSE IS NOT COVERED. SIMPLY CALL AND GET A WARRANTY AUTHORIZATION NUMBER AND IT WILL BE PROMPTLY AND CHEERFULLY TAKEN CARE OF.
BEAD ROLLER FAQ’s Q: WHAT MATERIAL CAN I USE IN THE BEAD ROLLER? A: YOU CAN USE ALUMINUM SHEET METAL UP TO 16GA. AND UP TO 18GA MILD STEEL. Q: CAN YOU CONVERT THE MODEL 2 BEAD ROLLER INTO AN ELECTRIC MODEL 3? A: YES, CALL OUR SALES ASSOCIATES AND ORDER THE ELECTRIC CONVERSION KIT. Q: ARE THE TOOLS REALLY MADE IN THE U.S.A. ? A: YES, ALL MACHINED PARTS ARE MADE IN OUR FACILITY IN TAMPA, FLORIDA. Q: CAN I USE THE BEAD ROLLER TUBES TO CONNECT HOSES? A: YES WE HAVE A TUBE BEAD ROLL AVAILABLE FOR THAT USE.
