Service manual

1-2 IP-421 PRINT CONTROLLER
Chapter 1 Overview
Interface: Parallel port
Based on Centronics (IEEE 1284)/Amphenol male 36pin connector
Network interface: (option)
KN-303 Network card
Network: Ethernet (100BaseTX/10BaseT)
Protocols: IPX/SPX (NetWare),
TCP/IP (LPD/LPR, peer-to-peer)
AppleTalk (EtherTalk)
Compliant OS:
Windows 95/98
Windows NT4.0/2000
Macintosh
Unix
Printer Language:
PCL
PostScript3 (option)
Printer drivers:
Windows 95/98 printer driver
Windows NT4.0/2000 printer driver
Host computer: A Windows based computer
Macintosh
Unix
Finisher: FS-107
paper tray unit: DB-209,DB-409
Size: 9.4 in (W) x 6.3 in (H) x 1.5 in (D)
Weight: Approximately 2.4 lb.
Power source: 5 V, 2 A or less (supplied from copier)
Operating conditions:temperature: 50 - 86
o
F,
humidity: 20-80%RH (condensation not allowed)
Restrictive Conditions:
* In the Printer mode, the EKC (Electric Key Counter) of the Konica 7020 se-
ries is not available.
* Although the Weekly Timer function of the Konica 7020 series is available in
the Printer mode, the power is not turned Off until the data output is finished
when print data remains in the E-RDH.
Notice: Specifications are subject to change for improvements without notice.
HOME